pietro barabaschi
(f4e)
23/10/2018, 08:30
OV - Overviews
Overview
The JT-60SA project was initiated in June 2007 under the framework of the Broader Approach (BA) agreement and Japanese national fusion programme for an early realization of fusion energy by conducting supportive and complementary work for the ITER project towards supporting the basis for DEMO. In 2009, after a complex start-up phase due to the necessity to carry out a re-baselining effort to...
Guoqiang Li
(Institute of Plasma Physica, CAS)
23/10/2018, 08:55
OV - Overviews
Overview
The Chinese Fusion Engineering Test Reactor (CFETR), complementing ITER, is aiming to demonstrate fusion energy production up to 200 MW initially and to eventually reach DEMO relevant power level, to manifest high duty factor of 0.3~0.5, and to pursuit tritium self-sufficiency with tritium breeding ratio (TBR) > 1. The key challenge to meet the missions of the CFETR is to run the machine in...
Masayoshi Sugimoto
(QST-Rokkasho)
23/10/2018, 09:20
OV - Overviews
Overview
In this report, the latest results of the validation activities of the IFMIF/EVEDA project under the Broader Approach agreement are overviewed. For the Linear IFMIF Prototype Accelerator (LIPAc) to demonstrate the 9MeV/125mA D+ beam acceleration, the beam qualification study of the injector was completed with the emittance of 0.16 pi mm mrad smaller than required 0.3 pi mm mrad, and the...
Dr
Hiroyasu Tanigawa
(National Institutes for Quantum and Radiological Science and Technology)
23/10/2018, 09:45
OV - Overviews
Overview
The structural material development for the breeding blanket in a future fusion reactor is regarded as the most challenging technical issue due to the significance of 14 MeV DT fusion neutron irradiation that induces high displacement damage with a significant amount of the transmutation formed gas elements such as helium and hydrogen.
The strategy of fusion in-vessel structural material...
