Technical Meeting on Nuclear Heating Theory and Data

19 Apr 2022, 08:00 → 22 Apr 2022, 17:00 UTC

C0213 (Vienna International Centre)

Objective

The purpose of the event is to review the theory of nuclear heating, as well as the data it relies upon and their processing, usage, suitability, and appropriateness in novel and traditional applications. Prompt nuclear heating and damage, secondary radiation sources terms, are important parameters in any nuclear system or protocol, in particular in shielding, material irradiation, and earth and life sciences nuclear applications. 

The meeting is to bring together the different savant societies experts able to support the necessary enhancements, processes and data forms, foreseen for the multiple energy, non-energy, earth and life sciences applications to support high-fidelity Multiphysics simulation efforts.

image002.jpg

indc-nds-0184.pdf

indc-nds-0852.pdf

Tuesday 19 April

11:00 Technical Discussion

12:00 Lunch Break

1 NHtd white paper

The technical meeting on nuclear heating theory an data; prompt, delayed and decay radiation heat, secondary particle’s energy productions and energy balance white paper describes the existent with regards to the field actual cover, capabilities, needs and challenges ahead. Heating is an important parameter in nuclear systems, particularly in unchartered R&D, while secondary radiation sources need to be better characterised, quantified, and qualified when they are required for an application. R&D is needed to support the necessary enhancements, processes, and data forms, foreseen for the multiple energy, non-energy, earth and life sciences applications and provision for high-fidelity Multiphysics simulation efforts.

Speaker: Dr Jean-Christophe SUBLET (IAEA)

White_paper_Nhtd.pdf

2 Toward a consistent calculation of prompt and beta decay observables from fission fragment

Accurate fission product yield (FPY) data consistent with fission observables in the evaluated nuclear data library are required for a broad range of nuclear energy applications in a wide energy range. For instance, delayed neutron yields, and gamma and beta decay energies released from the neutron-rich fission product undergoing beta decay should be consistent with the independent FPY.

In the nuclear reaction code, TALYS, a new feature to apply the Hauser-Feshbach statistical decay theory to the de-excitation of the fission fragment has been implemented by importing theoretical or phenomenological fission fragment distributions. The calculated independent FPY data are further assessed by examining beta-decay observables such as cumulative FPY, decay heat, and delayed neutron yields.

We present recent developments and calculated results by TALYS and beta-decay code.

Speaker: Shin OKUMURA (IAEA)

TM-NuclearHeatingTheory-and-Data.pdf

3 Estimation of decay heat from Spent Nuclear Fuel: a PSI example

Spent fuel characterisation is crucial for the safe and economical handling and storage of high-level radioactive waste, such as Spent Nuclear Fuel (SNF). Among other quantities, the knowledge of SNF decay heat impacts the design of canisters and underground repository. How well do we know the SNF decay heat, through measurements and calculations ? Part of the answer will be explored in this presentation, with a focus on the experience from realistic SNF decay heat calculations at PSI.

Speaker: Dimitri Rochman (PSI)

tm.rochman.april2022.pdf

16:30 Discussion

Wednesday 20 April

10:00 Technical Discussion

12:00 Lunch Break

4 Missing secondary gamma ray lines in ENDF/B-VIII.0 library

In the oil field, exploration of the subsurface is essential to answer questions regarding the location, quantity, type, and producibility of hydrocarbons. Well logging provides measurements of the characteristics of rock formations and the fluids in their pore spaces to help identify and evaluate interesting reservoirs. Downhole nuclear measurements focus on formation properties such as natural radioactivity, formation density, and hydrogen content, as well as the identification of the elemental and mineralogical composition of the rock through spectroscopy using secondary gamma rays from capture and inelastic reactions.

While comparing modeling results with experimental ones, we surprisingly discovered discrepancies between them on a significant number of isotopes.
The recent focus on replacing tools based on radioisotopic sources with those based on DT neutron generators opens many opportunities for new measurements but highlights the deficiencies of current cross sections. Those cross sections are not of interest only for the oil and gas exploration but also for space exploration to enhance rock identification.

I will present recent results focusing on some key elements and also the improvement brought on Manganese cross section.

Speaker: Marie-Laure Mauborgne (Schlumberger)

IAEA_Mauborgne_Final.pdf

5 KERMA calculation using TRIPOLI-4 and kinematics distributions of secondary particles.

The calculation of the energies deposited by secondary particles in matter (KERMA) depends on a large amount of data: cross-sections and angular and energy distributions of the particles produced. The secondary particles can be transported or not depending on the simulation modes of the Monte Carlo codes. For the Monte Carlo code TRIPOLI-4, the particles taken into account for transport are: neutrons, photons, electrons and positrons. We will focus on neutrons and photons and explain the calculation modes of these simulated deposited energies.
In a second part, we will discuss the problems encountered with the use of recent neutron and photon transport libraries for the simulation of secondary neutron and photon.

Speaker: Dr Cedric Jouanne (CEA Saclay)

IAEAMeeting_cjouanne.pdf

6 NJOY’s heatr, gaspr, groupr usage, capability, and limitation

NJOY’s heatr simulation of the energy-balance Kerma (kinetic energy release in material) provides a sensitive test of the consistency between the energy available from E+Q and the energy emitted as secondary neutrons and photons. The energy released by charged-particles and the recoil nucleus from an induced nuclear reaction is given by E + Q - E-bar-neutron - E-bar-gamma. Unfortunately, many nuclear evaluations are less than perfect in form and format and strange effects may occur, negative values or cooling instead of heating. In addition to computing the energy-balance heating, heatr also computes some kinematic limits that should bracket the energy-balance heating. The module prepares graphs showing the computed heating and its kinematic limits, for both neutron and photon. NJOY’s gaspr extend all gas (a<4) production reactions while NJOY’s groupr outputs light particle and residual production matrices. Recent applications have highlighted the needs for more detailed description of partials proton and alpha output channels while format consideration need to be carefully recognised when assembling evaluation with those same particles in the entrance channel. Added complexity occur when the material is composed of light nucleus, embedded in a compound environment or complex by nature.

Speaker: Dr Jean-Christophe SUBLET (IAEA)

Njoy-heatr-jcs.pdf

16:30 Discussion

Thursday 21 April

10:00 Technical Discussion

12:00 Lunch Break

7 Comparative study of PHITS code and NJOY for recoil cross section spectra under neutron irradiation

Because primary knock-on atoms (PKAs) create point defects and clusters in materials that are irradiated with neutrons, it is important to validate the calculations of recoil cross section spectra that are used to estimate radiation damage in materials. Here, the recoil cross section spectra of fission- and fusion relevant materials were calculated using the Event Generator Mode (EGM) of the Particle and Heavy Ion Transport code System (PHITS) and also using the data processing code NJOY2012-SPKA-6C with the nuclear data libraries TENDL2015, ENDF/BVII.1, and JEFF3.2. Heating numbers were also calculated using PHITS-EGM and compared with data extracted from the ACE files of TENDL2015, ENDF/BVII.1, and JENDL4.0. In general, the differences between the recoil cross section spectra of PHITS-TENDL2015 and NJOY-SPKA-6C-TENDL2015 were relatively small. From analyzing the recoil cross section spectra extracted from NJOY2012 + SPKA-6C, we found that the energy and angular recoil distributions for $^{72}$Ge,$^{75}$As, $^{89}$Y, and $^{109}$Ag are incorrect in ENDF/B-VII.1, and those for $^{90}$Zr and $^{55}$Mn are incorrect in JEFF3.2. From analyzing the heating number, we found that the data in the ACE file of TENDL2015 for all nuclides are problematic in the neutron capture region because of incorrect data regarding the secondary gamma energy.Details are described in our paper [Y. Iwamoto and T. Ogawa, NIMB 396 (2017) 26-33.].

Speaker: Yosuke Iwamoto (Japan Atomic Energy Agency)

IAEA-TM-iwamoto.pdf

8 A Generalized Framework for In-Line Energy Deposition in Monte Carlo Radiation Transport Simulations

A rigorous treatment of energy deposition in a Monte Carlo transport calculation, including coupled transport of all secondary and tertiary radiations, increases the computational cost of a simulation dramatically, making fully coupled heating impractical for many large calculations, such as 3-D analysis of nuclear reactor cores. However, in some cases, the added benefit from a full-fidelity energy-deposition treatment is negligible, especially considering the increased simulation run time. In this presentation we discuss a generalized framework for the in-line calculation of energy deposition during Monte Carlo transport simulations. This framework gives users the ability to select among several energy-deposition approximations with varying levels of fidelity. The presentation describes the computational framework, along with derivations of four distinct energy-deposition treatments. Each treatment uses a unique set of self-consistent approximations, which ensure that energy balance is preserved over the entire problem. By providing several energy-deposition treatments, each with different approximations for neglecting the energy transport of certain secondary radiations, the proposed framework provides users the flexibility to choose between accuracy and computational efficiency. Challenges associated with ensuring energy balance in certain situations (e.g., quasistatic simulations, time-dependent simulations, and/or simulations involving coupled transport of multiple radiation types) are discussed and several unresolved issues related to energy balance are highlighted.

Speaker: David Griesheimer (Naval Nuclear Laboratory)

2012 - MC Heating Framework (M&C2013-Paper).pdf

2013 - MC Heating Framework (M&C 2013-Presentation).pdf

2015 - In-Line Decay Source for MC (PHYSOR 2016 - Paper).pdf

2016 - In-Line Decay Source for MC (PHYSOR 2016 - Presentation).pdf

2020 - Energy Deposition in Non-Critical Systems (PHYSOR 2020) - Presentation.pdf

2021 - Power Normalization in Non-Critical Systems (JNE - Published).pdf

2022 - MC Heating Overview (IAEA Nuclear Heating Meeting).pdf

9 Using FUDGE and GIDI+ API to calculate energy deposition and other energy quantities

TBW

Speaker: Dr Bret Beck (LLNL)

IAEA_NuclearHeating_Beck.pdf

16:15 Discussion

Friday 22 April

10:00 Technical Discussion

12:00 Lunch Break

10 Neutron heating of metastables with NJOY

Metastable nuclides with complete secondary distributions are increasingly more available in major evaluations, allowing for the calculation of their KERMA values. When processing these metastable nuclides using NJOY’s heatr module, negative total energy release values are being calculated for certain nuclides.

On investigation, the method by which NJOY calculates the heating for inelastic reactions is incorrectly handling the Q-values for metastable materials resulting in significant negative values equivalent to the metastable energy level which may be greater than the contribution from all other reactions. The cause for these values have been identified and further questions have been raised for the processing of metastable nuclides.

Speaker: Tim Gaines (AWE)

Neutron heating of metastables with NJOY.pdf

11 Decay-heat validation of simulations with 14 MeV neutrons for fusion

Nuclear inventory simulations have a vital role to play in the planning and execution of future fusion experiments and power plants. They are able to predict the transmutation (burn-up) of materials and also quantify their radiological response, including decay heat, by tracing the production (and decay) rates of radioactive nuclides. This information can be used to plan maintenance schedules at nuclear facilities, satisfy nuclear regulators during reactor planning, and quantify the waste disposal needs during reactor decommissioning.

The validity of inventory simulations must be verified to give confidence in the predictions. Here we describe an important experimental benchmark of decay heat measurements that test the quality of nuclear code predictions with the FISPACT-II inventory code and nuclear data libraries. The fusion (14 MeV) decay-heat measurements performed at the Japanese FNS facility, combined with detailed assessment techniques, focussed on the complex breakdown of decay-heat contributions from individual radionuclides, have been employed to compare and test results from different international nuclear data libraries.

On-load nuclear heating is also important during fusion reactor operations and is an indirect measure of the damage energy experienced by materials. We highlight the difference between fusion and fission conditions in this respect, we raises questions about the usefulness of fission irradiations to test fusion materials responses.

Speaker: Mark Gilbert (CCFE)

mgilbert_decay_heat.pdf

15:30 Discussion and adjourn