Speaker
Prof.
Junji Kawanaka
(Institute of Laser Engineering, Osaka University)
Description
A new heating laser for fast ignition, called the LFEX-Laser, has been demonstrated with all four beams. The obtained total pulse energy was 2 kJ for a 1 ps pulse duration. The peak power of 2 PW is the highest of all kilojoule lasers in the world and was achieved with a high intensity contrast ratio of 1 × 10^10.
To increase the pulse energy to the kilojoule class in a short pulse of 1–2 ps, chirped-pulse amplification (CPA) was adopted. Recently, all four beams of this new LFEX-Laser were completed and high-power shots at kilojoule energies with a 1 ps pulse duration were demonstrated. In addition, a new pulse cleaner improved the pulse intensity contrast of the main pulse to suppress the pre-plasma, which significantly reduces the heating efficiency in fast ignition.
One of the key technologies enabling the realization of a kilojoule CPA system is the essential optics for CPA in a large enough size. In particular, the world’s largest dielectric grating (92 cm × 42 cm, 1740 grooves/mm) used in the pulse compressor has recently been developed through the collaboration of Okamoto Optics Works, Jovin Yvon, and Osaka University. Using the pulse compressor with the gratings, the typical pulse duration as short as about 1 ps was successfully obtained for all beams. The total pulse energy was 2 kJ, which corresponds to 2 PW. Deformable mirrors were used in the main amplifier to improve the focusing of the beams by compensating for wavefront distortions. About 70% of the pulse energy can be concentrated into a spot with a diameter of 5Fλ, where F is the F-number of the lens and λ is the laser wavelength of 1.053 μm.
Another key technology is our new pulse cleaner. Generally, amplified optical parametric fluorescence (AOPF) before the main pulse, which produces pre-plasmas, can be removed effectively with a saturable absorber (SA, Cr4+:YAG). In CPA, however, AOPF temporally overlaps with the chirped main pulse and is significant because the non-phase-locked AOPF is not compressed by the pulse compressor, making it difficult to remove it with an SA. Our new pulse cleaner combines the SA with the 4-f optical layout, to remove the AOPF. By using two pulse cleaners in the front end, a high contrast ratio of 1 × 10^10, compared to 2 × 10^7 without the cleaners, was obtained.
| Country or International Organization | Japan |
|---|---|
| Paper Number | IFE/1-6 |
Primary author
Prof.
Junji Kawanaka
(Institute of Laser Engineering, Osaka University)
Co-authors
Mr
Hideaki Matsuo
(Institute of Laser Engineering, Osaka University)
Dr
Hidetoshi Murakami
(Institute of Laser Engineering, Osaka University)
Prof.
Hiroyuki Shiraga
(Institute of Laser Engineering, Osaka University)
Mr
Hisao Kitamura
(Institute of Laser Engineering, Osaka University)
Mr
Kiyonobu Sawai
(Institute of Laser Engineering, Osaka University)
Mr
Koichi Tsuji
(Institute of Laser Engineering, Osaka University)
Mr
Koji Kawabata
(Institute of Laser Engineering, Osaka University)
Prof.
Koji Tsubakimoto
(Institute of Laser Engineering, Osaka University)
Mr
Masato Ishida
(Institute of Laser Engineering, Osaka University)
Mr
Noboru Morio
(Institute of Laser Engineering, Osaka University)
Prof.
Noriaki Miyanaga
(Institute of Laser Engineering, Osaka University)
Mr
Satoshi Matsuo
(Institute of Laser Engineering, Osaka University)
Prof.
Shigeki Tokita
(Institute of Laser Engineering, Osaka University)
Prof.
Takahisa Jitsuno
(Institute of Laser Engineering, Osaka University)
Mr
Takayasu Sakamoto
(Institute of Laser Engineering, Osaka University)
Mr
Tetsuji Kawasaki
(Institute of Laser Engineering, Osaka University)
Ms
Tomomi Yanagida
(Institute of Laser Engineering, Osaka University)
Ms
Toshiko Sezaki
(Institute of Laser Engineering, Osaka University)
Mr
Yasuhiro Suzuki
(Institute of Laser Engineering, Osaka University)
Prof.
Yoshiki Nakada
(Institute of Laser Engineering, Osaka University)
Mr
Yuhei Kawakami
(Institute of Laser Engineering, Osaka University)
Mr
Yuho Fujimura
(Institute of Laser Engineering, Osaka University)
Mr
Yuichi Matsuda
(Institute of Laser Engineering, Osaka University)
