-
08:30
Effect of sorbent selection and geometrical arrangement of cryopanels on pumping speed of cryopump
-
Ranjana Gangradey
(Institute for Plasma Research)
-
08:30
Study of locking mechanism of locked-mode-like instability in helical plasmas
-
Yuki Takemura
(National Institute for Fusion Science)
-
08:30
Particle balance investigation with the combination of rate equations of hydrogen state and hydrogen barrier model in long duration discharges on all-metal PFW QUEST
-
Kazuaki Hanada
(Advanced Fusion Research Center, Research Institute for Applied Mechanics, Kyushu University)
-
08:30
Studies on high temperature vacuum brazing of Tungsten to Tungsten alloy materials for DEMO divertor application
-
Premjit Singh Kongkham
(Institute for Plasma Research)
-
08:30
Recent progresses on the RMP researches towards active control of tearing mode in the J-TEXT tokamak
-
Yonghua Ding
(International Joint Research Laboratory of Magnetic Confinement Fusion and Plasma Physics (IFPP), AEET, SEEE, CnHUST)
-
08:30
The Potential For Retention of Spin Polarization To Raise Fusion Reactivity
-
Sterling Smith
(General Atomics)
-
08:30
The Advanced Tokamak Path to a Compact Net Electric Pilot Plant
-
Jin Myung Park
(Oak Ridge National Laboratory)
-
08:30
Extent of Tritium Contamination of Helium Circuit in a Fusion Reactor- probable scenarios
-
Vinit Shukla
(ITER-India, IPR)
-
08:30
Neutron flux distributions in the LHD torus hall evaluated by an imaging plate technique in the first campaign of deuterium plasma experiment
-
Makoto Kobayashi
(National Institute for Fusion Science)
-
08:30
Isotope effects on confinement and turbulence in ECRH plasma of LHD
-
Kenji Tanaka
(National Institute for Fusion Science)
-
08:30
Core transport improvement in stable detachment with RMP application to the edge stochastic layer of LHD
-
Masahiro Kobayashi
(JpNIFS)
-
08:30
Surface Characterization of Li coatings and their interaction with plasmas for fusion applications via Ion Beam Analysis Techniques
-
Felipe Bedoya
(MIT-Plasma Science & Fusion Center)
-
08:30
RGA Analysis and Surface Analysis of SST-1 Graphite Tiles in High Temperature Vacuum Baking
-
ArunPrakash Arumugam
(Institute for Plasma Research, Bhat, Gandhinagar, India)
-
08:30
Development of HINEG and its experimental campaigns
-
Jieqiong Jiang
(Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031, China)
-
08:30
Neutronics Experiment for Design Validation of Indian TBM Shield Module
-
H. L. SWAMI
(Institute for Plasma Research)
-
08:30
Scaling Study of Reconnection/ Merging Heating of Spherical Tokamak Plasmas for Direct Access to Burning Plasma
-
Yasushi Ono
(University of Tokyo)
-
08:30
Dependence of RMP penetration threshold on plasma parameters and ion species in helical plasmas
-
Kiyomasa WATANABE
(National Institute for Fusion Science)
-
08:30
Characterization of Isotope Effect on Confinement of Dimensionally Similar NBI-Heated Plasmas in LHD
-
Hiroshi Yamada
(National Institute for Fusion Science)
-
08:30
Study on production and extraction of negative ion impurity ions in a Cesiated negative ion source
-
Bharathi Magesh
(Institute for plasma research)
-
08:30
Energy differential and displacement damage cross section of DT neutron induced reactions on fusion reactor materials (Fe, Cr & W)
-
Mayank Rajput
(Institute for Plasma Research)
-
08:30
Application of ANSYS FLUENT MHD Code for Liquid Metal MHD Studies
-
Anita Patel
(Institute For Plasma Research)
-
08:30
A Multi-Parameter Optimization technique considering temporal and spatial variation in nuclear response of materials in Fusion devices
-
Priti Kanth
(Institute for Plasma Research, HBNI)
-
08:30
Advanced capabilities of multi-functional calculation program SuperMC3.2 for complex nuclear system
-
Lijuan Hao
(Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031, China)
-
08:30
Experimental analysis of self-organized structure and transport on magnetospheric plasma device RT-1
-
Masaki Nishiura
(The University of Tokyo)
-
08:30
Real-Time Feedback Control System for Plasma Position Stabilisation in ADITYA-U Tokamak
-
ROHIT KUMAR
(Institute For Plasma Research)
-
08:30
Radiation Properties of the Metal Structural Materials during Low-Temperature Damaging Irradiation
-
Viacheslav Chernov
(A.A.Bochvar High-technology Research Institute of Inorganic Materials (SC "VNIINM"))
-
08:30
Novel Method for Determination of Tritium Depth Profiles in Metallic Samples
-
Elina Pajuste
(University of Latvia)
-
08:30
Fully Non-inductive 2nd Harmonic Electron Cyclotron Current Ramp-up with Focused Polarized Beams in the QUEST Spherical Tokamak
-
Hiroshi Idei
(Research Institute for Applied Mechanics, Kyushu University)
-
08:30
The Configuration Dependence of Isotope Effects on Turbulence System in Heliotron J
-
Shinsuke OHSHIMA
(Kyoto University)
-
08:30
Evaluation of Beam Properties of a Negative Hydrogen Source by Doppler Shift Spectroscopy
-
Arnab Jyoti Deka
(Institute for Plasma Research)
-
08:30
Thermal Performance Analysis of Al2O3 - Water Nanofluid as a Coolant in Nuclear Applications
-
Sayantan Mukherjee
(Kalinga Institute of Industrial Technology,Bhubaneswar,Odhisa(India))
-
08:30
Electron Bernstein Wave Heating and Current Drive with Multi-Electron Cyclotron Resonances During Non-inductive Start-up on LATE
-
Hitoshi Tanaka
(Kyoto University)
-
08:30
Neutronic analysis of IFMIF-DONES Test Cell cooling system
-
Gediminas Stankunas
(Lithuanian Energy Institute)
-
08:30
Rapid Radial Propagation of Momentum Change and Flow Oscillation Associated with a Pellet Injection
-
Tokihiko Tokuzawa
(National Institute for Fusion Science)
-
08:30
Synergistic Effect of Impurity and Hydrogen Gas Puffs on Plasma Detachment in the GAMMA 10/PDX Tandem Mirror
-
Naomichi Ezumi
(University of Tsukuba)
-
08:30
Effect of Simulated Post Weld Heat Treatment on the Microstructure and Mechanical Properties of IN-RAFM Steel
-
Chandra Sekhar Sasmal
(Institute for Plasma Research)
-
08:30
Thermo-hydraulic Analysis of Forced Flow Helium Cooled Cryopanels of Cryopump Using Venecia Code
-
Samiran Shanti Mukherjee
(Institute for Plasma Research)
-
08:30
Development of Technology for Fabrication of Prototype Ion Extraction Grid for Fusion Research
-
Mukti Ranjan Jana
(Institute for Plasma Research)
-
08:30
Development of RF based capacitively-coupled plasma system for deposition of tungsten nano layers on graphite
-
Sachin S. Chauhan
(Department of Physics, Shri Vaishnav Institute of Technology and Science, Indore, India)
-
08:30
Neutron Irradiation Impact on ITER Grade Insulating Material
-
Sejal Shah
(ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, India)
-
08:30
Conceptual design of Neutron Activation System for IN-LLCB TBM
-
Shailja Tiwari
(Institute for Plasma Research)
-
08:30
Experimental Studies of Plasmoid Reconnection for Closed Flux Current Generated by Coaxial Helicity Injection on HIST
-
Masayoshi Nagata
(University of Hyogo)
-
08:30
Design Progress of Advanced Fusion Neutron Source for JA/DEMO Fusion Reactor
-
Kentaro Ochiai
(QST)
-
08:30
Artificial Neural Network for Yield Strength Prediction of Irradiated RAFM Steels
-
Agraj Abhishek
(Institute for Plasma Research)
-
08:30
Modification in LHCD DAC System to Incorporate Measurement of RF Power
-
Rameshkumar Joshi
(Institute for Plasma Research, India)
-
08:30
Overview of the Methods developed for Fission Plants Safety relevant to the Safety of Fusion Facilities
-
Dobromir Panayotov
(FUSION FOR ENERGY)
-
08:30
Tritium Handling and Recovery System for Accelerator Based 14-MeV Neutron Generator
-
Deepti dubey
(ITER-India, IPR, Bhat, Gandhinagar, 382428, Gujarat, India)
-
08:30
Plasma current generation and ramp-up by the lower hybrid wave using outboard-launch and top-launch antennas on the TST-2 spherical tokamak
-
Akira Ejiri
(Graduate School of Frontier Sciences, The University of Tokyo)
-
08:30
Multiple turbulent plasma states in the H-mode transition on JT-60U
-
Kensaku Kamiya
(QST, Naka)
-
08:30
Effect of deuterium plasmas on carbon impurity transport in the edge stochastic magnetic field layer of Large Helical Device
-
Tetsutarou Oishi
(National Institute for Fusion Science)
-
08:30
Overview of the NSTX-U Recovery Project Physics and Engineering Design
-
Stefan Gerhardt
(Princeton Plasma Physics Laboratory)
-
08:30
Novel Approach of Pulsed-Glow Discharge Wall Conditioning in ADITYA Upgrade Tokamak
-
Kumarpalsinh Jadeja
(Institute for plasma Research)
-
08:30
Ion Irradiation Induced Modifications in Tungsten Foils
-
Asha Attri
(ITER-India, IPR)
-
08:30
Effect of magnetic field on the corrosion behavior of Indian RAFMS in liquid Pb-Li
-
Poulami Chakraborty
(Bhabha Atomic Research Centre, India)
-
08:30
Er2O3 Coating by Multilayer Metallic Sputtering and Intermediate Oxidation Approach
-
Pratipalsinh A. Rayjada
(Institute for Plasma Research)
-
08:30
3MW Dual Output High Voltage Power Supply Operation: Results for Accuracy, Stability and Protection Test
-
AMITKUMAR PATEL
(INSTITUTE FOR PLASMA RESEARCH)
-
08:30
Global supply of tritium for fusion R&D
-
Matti Coleman
(CCFE)
-
08:30
Investigation of fine structure formation of guide field reconnection during merging plasma startup of spherical tokamak in TS-3U
-
Hiroshi Tanabe
(University of Tokyo)
-
08:30
Development and Qualification of Passive Active Multijunction (PAM) Launcher for LHCD System of ADITYA -Upgrade Tokamak
-
Yogesh Jain
(Institute for Plasma Research, HBNI)
-
08:30
Multiphysics approach to plasma neutron source modelling at the tokamak JET
-
Žiga Štancar
(Jožef Stefan Institute)
-
08:30
Pellet fuelling prospects and injector system for Aditya-U tokomak
-
Jyoti Shankar Mishra
(Institue for plasma research)
-
08:30
Dispersion Strengthened Copper Alloys Produced by Mechanical Alloying and Hot Isostatic Pressing for Divertor Application
-
Hiroyuki Noto
(National Institute for Fusion Science)
-
08:30
Effect of magnetic field structure on electron internal transport barrier
and its role for the barrier formation in Heliotron J
-
Takashi Minami
(Institute of Advanced Energy, Kyoto University)
-
08:30
Investigation of magnetic topology on spontaneous transition phenomena for high beta plasma of Large Helical Device
-
Yasuhiro Suzuki
(National Institute for Fusion Science)
-
08:30
New approach to the control of particle recycling using divertor pumping in LHD
-
Gen Motojima
(National Institute for Fusion Science)
-
08:30
Status of Studies of Pulsed Heat Load Influence on Tungsten at BETA Facility and Station of SR Scattering "Plasma" in BINP
-
Arakcheev Aleksey
(Budker INP)
-
08:30
2D and 3D modelling of JT-60SA for disruptions and plasma start-up
-
Gianmaria De Tommasi
(Università degli Studi di Napoli Federico II)
-
08:30
The DEMO fuel cycle – novel technologies for tritium inventory reduction
-
Christian Day
(Karlsruhe Institute of Technology)
-
08:30
Design and Simulation Studies of Calorimetric Dummy Load for Gyrotron System
-
Axat Patel
(Assistant Professor)
Maulik Shah
(Assistant Professor)
-
08:30
Performance of 14-MeV Neutron Generator at IPR
-
SUDHIRSINH VALA
(INSTIUTE FOR PLASMA RESEARCH)
-
08:30
Contribution of fusion energy to low-carbon development under the Paris Agreement and accompanying uncertainties
-
Keii Gi
(Research Institute of Innovative Technology for the Earth)
-
08:30
Safety factor profile control with reduced CS flux consumption during plasma current ramp-up phase using reinforcement learning technique
-
Takuma Wakatsuki
(National Institutes for Quantum and Radiological Science and Technology)
-
08:30
Fluctuation suppression by the potential formation in GAMMA 10/PDX plasma
-
Masayuki Yoshikawa
(University of Tsukuba)
-
08:30
Energetic-ion Confinement Studies by using Comprehensive Neutron Diagnostics in the Large Helical Device
-
Kunihiro Ogawa
(National Institute for Fusion Science)
-
08:30
Tungsten Fuzz Formation on the Nitrided Tungsten Surface
-
Timur Tulenbergenov
(Institute of Atomic Energy of National Nuclear Center)
-
08:30
New Fusion Facilities at UKAEA – FTF and H3AT
-
Colin Walters
-
08:30
A Concept of Self-Cooled Breeding Blanket with Advanced Molten Salt Flinak for High-Efficiency and Long-Life Operation
-
Juro Yagi
(Institute of Advanced Energy, Kyoto University)
-
08:30
Structural analysis for strength and fatigue life of half coupling weldment for large cooling water pipes
-
Kunal Bhatt
(ITER-India, Institute for Plasma Research)
-
08:30
Performance of Transmission Line System at 42±0.2GHz for an Indigenous Gyrotron System
-
Pujita Bhatt
(Senior Research Fellow)
-
08:30
Structural and Vibrational Properties of Lead-Lithium Alloys: A First Principles Study
-
Shyamkumar Khambholja
(B & B Institute of Technology, Vallabh Vidyanagar, Gujarat, India)
-
08:30
Deuteron Beam Commissioning of the Linear IFMIF Prototype Accelerator Source and LEBT
-
Masayoshi Sugimoto
(JpQSTRFI)