Conveners
B16: Technical Cooperation Success Stories - country reports
- Joon-Ha Jin (GammaTech Inc.)
- TSec Patrick Brisset
Description
Technical Cooperation Success Stories
Mr
Kabey Mbaz Rodolfo
(Centro Tecnologico Nacional, Angola)
28/04/2017, 11:15
RADIATION TECHNOLOGIES FOR MEASUREMENT
Oral
The National Technological Centre (CTN) with headquarter in Luanda, is a public institution tutored by the Ministry of Science and Technology, in charge to realize applied scienti-º3fic research.
This paper aims to inform the success of the participation of Technological National Centre in the activities of the cooperation between Angola and the International Atomic Energy Agency through the...
Mr
Arabi Suleiman ABDULLAHI
(Centre for Energy Research and Training, Ahmadu Bello University, Nigeria)
28/04/2017, 11:35
RADIATION TECHNOLOGIES FOR MEASUREMENT
Oral
Nigeria as a member State of the International Atomic Energy Agency (IAEA) has benefited immensely in the field of radioisotope technology through the agency’s support in manpower development, deployment of relevant equipment and other relevant support towards the Centre’s desire to setup an Industrial Isotope Technology (IIT) laboratory at the Centre for Energy research and training (CERT),...
Mr
Peter Baricholo
(National University of Science and Technology, Department of Applied Physic, P. O. AC939, Ascot, Bulawayo, Zimbabwe)
28/04/2017, 11:55
RADIATION TECHNOLOGIES FOR MEASUREMENT
Oral
Major activities carried out Zimbabwe with support from IAEA towards industrial applications of radioisotopes are presented. Au198 was used to determine the Residence Time Distribution (RTD) of limestone and clay in the production of clinker at PPC Colleen Bawn factory near Gwanda with the objective of determining hold-up and grinding efficiencies of a ball mill operating in a closed circuit...
Mr
Denis AQUINO
(Philippine Nuclear Research Institute, Philippines)
28/04/2017, 12:15
RADIATION TECHNOLOGIES FOR MEASUREMENT
Oral
Computed Tomography (CT) is a non-invasive technique that can provide two-dimensional cross-section image and information on the internal structure of an object including abnormalities and their dimensions using spatial measurements across it. CT has been long used and is well established in the medical and NDT applications but because of emerging technologies and through research and...
Mr
Collins OMONDI
(Kenya Bureau of Standards, Kenya)
28/04/2017, 12:35
RADIATION TECHNOLOGIES FOR MEASUREMENT
Oral
The Kenya Bureau of Standards (KEBS) in partnership with IAEA has set up a Radiotracer Data Analysis measurements facility using a flow rig under Project RAF/0/004 : Cleaner and safer management of industrial. The purpose of the facility is to promote the radiotracer RTD method extensively to industries, in order to optimize processes, solve industrial problems, improve product quality, save...
