Since 18 of December 2019 conferences.iaea.org uses Nucleus credentials. Visit our help pages for information on how to Register and Sign-in using Nucleus.

22–27 Oct 2018
Mahatma Mandir Conference Centre
Asia/Kolkata timezone
CONFERENCE MATERIAL NOW AVAILABLE!

First Plasma Scenario Development for HL-2M

25 Oct 2018, 08:30
4h
Mahatma Mandir Conference Centre

Mahatma Mandir Conference Centre

Gandhinagar (nearest Airport: Ahmedabad), India
Poster P5 Posters

Speaker

Prof. Xianming SONG (Southwestern Institute of Physics)

Description

HL-2M tokamak is now under construction in China as a modification to the HL-2A facility, with nominal parameters as follows: Ip=1.5-3.0MA, B=2.2T, major radius= 1.78m, minor radius=0.65m, elongation =1.6-1.8, triangularity >0.5. It is a real challenge to build a new machine in fusion community, HL-2M suffers from a long delay for the first plasma. In order to fulfil the requirement of engineering and government qualification of the machine in a short time, two first plasma scenarios for HL-2M are designed with a powerful plasma scenario design tool based on Matlab. The two scenarios, one for circular limited configuration and one for larger aspect ratio and lower elongation divertor configuration, are compatible with the magnetic diagnostic system and power supply system, which are not fully equipped and well tested. The PF current and voltage waveform for these two scenarios have been calculated with the plasma scenario design tool through a plasma resistive model which can estimate the resistive flux consumption. The key parameters for these two scenarios are as follows: toroidal field 1.4T, plasma current 200 kA with 1000 microsecond flattop. For the sake of simplicity and safety in first plasma campaign, only small parts of PF coils are used in the plasma discharge, no initial magnetization is exploited, no PF current zero-crossing is allowed, no vertical displacement event is allowed. To facilitate obtaining the plasma, two gyrotrons of 68GHz with 500kW each are exploited for preionization and assisted startup. The vacuum vessel baking temperature will reach to 300 Celsius degree during machine conditioning. In this paper, the geometric parameters of PF and CS, together with that of TF coils and Vacuum Vessel (VV). Also presented are an original matlab-based tool for tokamak modeling and plasma scenario development. With this tool, the current waveforms and voltage waveforms of CS and PF coils are calculated by a given plasma resistance model. The parameters of CS and PF coils presented here can provide reference for later plasma scenario design for HL-2M; the ideas for simple and safe first plasma scenarios can apply to other new machine in its first plasma campaign. This work is supported by the Chinese National Fusion Project for ITER under grant No. 2015 GB105004.
Country or International Organization China, People's Republic of
Paper Number EX/P5-30

Primary author

Prof. Xianming SONG (Southwestern Institute of Physics)

Co-authors

Jiaxian LI (Southwestern Institute of Physics) Mr Jim Leuer (General Atomics P.O.Box85608, San Diego, CA 92186-5608 (Retired)) Mr Jinhua ZHANG (Southwestern Institute of Physics) Dr Xiao SONG (Southwestern Institute of Physics)

Presentation materials

There are no materials yet.