Speaker
Prof.
Takayoshi Norimatsu
(Institute of Laser Engineering, Osaka University)
Description
In this work, we report a conceptual design of a laser fusion experimental reactor (LIFT) and an issue analysis of the design. After the demonstration of ignition and burn by a single shot in fast ignition experiment, construction of an experimental reactor will start. In order to bridge the technological gap between the single-shot experiment and a commercial reactor, an experimental reactor LIFT is conceptually designed based on a scheme of three phases. The full-scale laser will be constructed at the first phase and chambers will be constructed around the laser depending on the phase. The goal of the phase I is to demonstrate repetitive fusion burns in a chamber without blankets. The goal of the phase II is to show electric power generation in a dry-wall chamber with solid blankets. The goal of the Phase III is long time operation with a wet-wall, and liquid LiPb blankets. Material test for commercial reactor is also important mission of this phase. Issues on the final optics and radiation safety will be also discussed.
| Country or International Organization | Japan |
|---|---|
| Paper Number | IFE/P5-19 |
Primary author
Prof.
Takayoshi Norimatsu
(Institute of Laser Engineering, Osaka University)
Co-authors
Prof.
Hiroyuki Shiraga
(Institute of Laser Engineering, Osaka University)
Dr
Hisanori Fujita
(Institute of Laser Engineering, Osaka University)
Dr
Kunihiko Okano
(Keio University)
Dr
Yasuji Kozaki
(Institute of Laser Engineering, Osaka University)
