Name: Technical Meeting on Synergies in Technology Development between Nuclear Fission and Fusion for Energy Production
Start: 2022-06-06T09:00:00+02:00
End: 2022-06-10T17:00:00+02:00
Location: Vienna, Austria (virtual participation possible)

Technical Meeting on Synergies in Technology Development between Nuclear Fission and Fusion for Energy Production

from Monday, June 6, 2022 (9:00 AM) to Friday, June 10, 2022 (5:00 PM)

Monday, June 6, 2022
1:00 PM
1:00 PM - 1:30 PM
Room: CR6, 7th Floor, C Building
Contributions

1:00 PM Opening Remarks - Mikhail Chudakov, DDG-NE, IAEA

1:10 PM Meeting Objectives and Expected Outputs - Sehila Gonzalez de Vicente (IAEA) Vladimir Kriventsev (IAEA)
1:30 PM
1:30 PM - 2:10 PM
Room: CR6, 7th Floor, C Building
Contributions

1:30 PM Overview: Status of fusion technology: needs and challenges - Luigi Di Pace Sehila Gonzalez de Vicente (IAEA)

1:50 PM IAEA ACTIVITIES ON SYNERGIES IN TECHNOLOGY DEVELOPMENT BETWEEN NUCLEAR FISSION AND FUSION FOR ENERGY PRODUCTION - Nicole Virgili Vladimir Kriventsev (IAEA)
2:10 PM
2:10 PM - 3:10 PM
Room: CR6, 7th Floor, C Building
Contributions

2:10 PM Overview: Nuclear fusion as an element of future energy systems - Alexander Bychkov (Senior Nuclear Engineering Expert - INPRO) Marco Utili (ENEA) Vladimir Artisyuk (State Atomic Energy Corporation “Rosatom”)

2:30 PM SUSTAINABLE FUSION/ FISSION DEPLOYMENT SCENARIOS ON THE LONG TERM FOR PROPER ADDRESSING OF CLIMATE CHANGE - Enrique Morales (Centro de Altos Estudios Estratégicos (CALEN, Ministry of Defense), Montevideo, Uruguay)

2:50 PM FUSION REACTORS IN INPRO STRATEGIC STUDIES AND NEW INPRO COLLABORATIVE PROJECT ON THE “LEGAL AND INSTITUTIONAL ISSUES OF PROSPECTIVE DEPLOYMENT OF FUSION FACILITIES” - Alexander Bychkov (Senior Nuclear Engineering Expert - INPRO)
3:10 PM Coffee Break
Coffee Break
3:10 PM - 3:30 PM
Room: CR6, 7th Floor, C Building
3:30 PM
3:30 PM - 3:50 PM
Room: CR6, 7th Floor, C Building
Contributions

3:30 PM SYNERGIES BETWEEN FUSION AND FISSION ENERGY CONVERSION SYSTEMS - Luigi Candido (Politecnico di Torino)
3:50 PM
3:50 PM - 4:30 PM
Room: CR6, 7th Floor, C Building
Contributions

3:50 PM FUSION FOR THE ENERGY MARKET: ECONOMIC AND MARKET CONSIDERATIONS - Shutaro Takeda (Kyoto University) Thomas Griffiths

4:10 PM THE COMMERCIALISATION OF FUSION FOR THE ENERGY MARKET: A REVIEW OF SOCIO-ECONOMIC STUDIES - Thomas Griffiths (Imperial College London)
4:30 PM
4:30 PM - 4:50 PM
Room: CR6, 7th Floor, C Building
Contributions

4:30 PM GENERAL CONSIDERATIONS ON NEEDED INFRASTRUCTURE - Jose Bastos Stephanie Seely (IAEA NIDS)
Tuesday, June 7, 2022
10:00 AM
10:00 AM - 11:20 AM
Room: CR6, 7th Floor, C Building
Contributions

10:00 AM Overview: Structural materials and circulating fluids - Alfons Weisenburger (KIT) Lorenzo Malerba (CIEMAT) Marco Utili (ENEA)

10:20 AM CROSS-CUTTING ISSUES IN FUSION AND FISSION MATERIALS DEVELOPMENT - Lorenzo Malerba (CIEMAT)

10:40 AM FISSION AND FUSION WATER COOLING CIRCUITS: CHEMISTRY, CORROSION MITIGATION AND MATERIALS - Claudia Gasparrini (Consorzio RFX)

11:00 AM MATERIAL COMPATIBILITY WITH LIQUID METAL AND MITIGATION STRATEGIES: REMOVAL OF ACTIVATION CORROSION PRODUCTS - Marco Utili (ENEA)
11:20 AM Coffee Break
Coffee Break
11:20 AM - 11:50 AM
Room: CR6, 7th Floor, C Building
11:50 AM continued
continued
11:50 AM - 12:50 PM
Room: CR6, 7th Floor, C Building
Contributions

11:50 AM COMMONALITIES BETWEEN MATERIALS DEVELOPMENT IN FISSION AND FUSION TECHNOLOGIES - Giacomo Aiello (EUROfusion )

12:10 PM THE KEY ENABLING ROLE OF DUCTILE AMORPHOUS OXIDE COATINGS FOR GENERATION IV AND FUSION NUCLEAR POWER PLANTS - Fabio Di Fonzo (Istituto Italiano di Tecnologia)

12:30 PM THE BEHAVIOUR OF MA956 AND 316L-ALUMINIZED STEELS IN SUPERCRITICAL WATER - Maria Mihalache (RATEN-ICN, Institute For Nuclear Research)
12:50 PM Lunch Break
Lunch Break
12:50 PM - 1:50 PM
Room: CR6, 7th Floor, C Building
1:50 PM
1:50 PM - 3:50 PM
Room: CR6, 7th Floor, C Building
Contributions

1:50 PM Overview: Fuel Cycle - Anzhelika Khaperskaia (IAEA) Clement Hill (IAEA) Luigi DI PACE Marco Utili (ENEA) Nicholas Smith (IAEA) Sehila Gonzalez de Vicente (IAEA)

2:10 PM DEVELOPMENT OF PLASMA TORCH FOR WASTE MANAGEMENT - Shahid Hussain (National Tokamak Fusion Program)

2:30 PM THE CONCEPT OF TRITIUM FUEL CYCLE FOR A TOKAMAK BASED FUSION NEUTRON SOURCES IN THE RUSSIAN FEDERATION - Sergey Ananyev (NRC "Kurchatov Institute")

2:50 PM SYNERGY OF FISSION AND FUSION: THE PATH TO CLEAN NUCLEAR ENERGY SYSTEM - Vladimir ARTISYUK (State Atomic Energy Corporation “Rosatom”)

3:10 PM CROSS-CUTTING ISSUES IN FUSION AND FISSION TRITIUM MANAGEMENT - Marco Utili (ENEA)

3:30 PM EXTRACTION AND SEPERATION OF TRITIUM, THE NUCLEAR FUSION FUEL AND THE BY-PRODUCT OF FISSION - Elina Pajuste (University of Latvia)
3:50 PM Coffee Break
Coffee Break
3:50 PM - 4:20 PM
Room: CR6, 7th Floor, C Building
4:20 PM
4:20 PM - 4:40 PM
Room: CR6, 7th Floor, C Building
Contributions

4:20 PM Overview: Decommissioning considerations - Christelle Decanis David Torcy Olivier Gastaldi
4:40 PM
4:40 PM - 5:00 PM
Room: CR6, 7th Floor, C Building
Contributions

4:40 PM Open discussion - All
Wednesday, June 8, 2022
10:00 AM
10:00 AM - 11:00 AM
Room: CR6, 7th Floor, C Building
Contributions

10:00 AM Overview: Manufacturing and supply chain - Shutaro Takeda (Kyoto University)

10:20 AM RESEARCH PROGRESS AND CHALLENGES FOR CFETR FUSION REATOR - Hu Jiansheng (Institute of Plasma Physics, Chinese Academy of Sciences)

10:40 AM ON THE AVAILABLITY, SUPPLY AND USE OF CRITICAL NATURAL RESOURCE FOR THE REALISATION OF THE FUSION INDUSTRY - Richard Pearson (Kyoto Fusioneering Ltd.)
11:00 AM
11:00 AM - 11:20 AM
Room: CR6, 7th Floor, C Building
Contributions

11:00 AM ITER – THE WAY TO LOOK AT THE FUTURE - Sergio Orlandi (ITER)
11:20 AM
11:20 AM - 11:40 AM
Room: CR6, 7th Floor, C Building
Contributions

11:20 AM EU-DEMO OPERATION AND MAINTENANCE POTENTIAL ISSUES AND NPP EXPERIENCE - Sergio Ciattaglia
11:40 AM Coffee Break
Coffee Break
11:40 AM - 12:10 PM
Room: CR6, 7th Floor, C Building
12:10 PM
12:10 PM - 1:10 PM
Room: CR6, 7th Floor, C Building
Contributions

12:10 PM ONLINE NEUTRON MEASUREMENT SYSTEMS FOR IN-VESSEL MONITORING IN FISSION REACTORS: APPLICABILITY TO BREEDING BLANKETS OF DEMO - Philippe Filliatre (CEA, DES, IRESNE, DER, Cadarache, 13108 Saint-Paul-lez-Durance, France)

12:30 PM RADIATION TESTS ON COMPONENTS FOR THE ITER PROJECT - Jessica Scifo (ENEA)

12:50 PM REAL-TIME MEASUREMENTS OF RELEVANT NUCLEAR AND RADIATION QUANTITIES IN FUSION EXPERIMENTS - Nicola Fonnesu (ENEA)
1:10 PM Lunch Break
Lunch Break
1:10 PM - 2:10 PM
Room: CR6, 7th Floor, C Building
2:10 PM
2:10 PM - 3:50 PM
Room: CR6, 7th Floor, C Building
Contributions

2:10 PM Overview: Modelling and simulations & Nuclear data - Andrew Davis (United Kingdom Atomic Energy Authority) Maurizio Angelone (ENEA)

2:30 PM SINBAD PROJECT AND OUTCOMES OF WPEC SUBGROUP 47 ON SHIELDING BENCHMARK USE - Ivan Kodeli (Jozef Stefan Institute)

2:50 PM FUSION NEUTRONICS EXPERIMENTS FOR NUCLEAR DATA AND NEUTRONICS TOOLS VALIDATION AT THE 14 MEV FRASCATI NEUTRON GENERATOR - Maurizio Angelone (ENEA)

3:10 PM SIMULATION OF FUSION NEUTRON DAMAGE IN TUNGSTEN, MOLYBDENUM AND IRON USING HIGH ENERGY PROTONS, HIGH ENERGY IONS, HIGH ENERGY NEUTRONS AND FISSION NEUTRONS - Olga Ogorodnikova (National Research Nuclear University “MEPHI” (Moscow Engineering Physics Institute))

3:30 PM MOOSE FRAMEWORK FOR RESEARCH AND DEVELOPMENT OF FISSION AND FUSION REACTORS - Gyanender Pratap Singh (Idaho National Laboratory)
3:50 PM Coffee Break
Coffee Break
3:50 PM - 4:20 PM
Room: CR6, 7th Floor, C Building
4:20 PM
4:20 PM - 6:00 PM
Room: CR6, 7th Floor, C Building
Contributions

4:20 PM Overview: Design Safety, Safety Analysis and Regulation - Frederic Stephani Masahiro Aoki Paolo Contri Paula Calle Vives (IAEA) Sehila Gonzalez de Vicente (IAEA)

4:40 PM EMERGENCY PREPAREDNESS AND RESPONSE: TOWARDS IDENTIFYING SYNERGIES BETWEEN FISSION AND FUSION POWER REACTORS - Frederic Stephani

5:00 PM TOWARDS A FUSION SPECIFIC REGULATORY FRAMEWORK BASED ON THE APPLICABILITY OF THE CURRENT NUCLEAR FRAMEWORK - Joachim Herb (Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) mbH)

5:20 PM JOINT EUROPEAN TORUS D-T SAFETY CASE - Lois Roberts (UKAEA) Omar Afify (UKAEA)

5:40 PM LEVERAGING PARTICLE ACCELERATOR AND RADIOACTIVE MATERIAL SAFETY PARADIGMS FOR REGULATING FUSION DEVICES - Michael Hua (Helion Energy) Sachin Desai (Helion Energy)
Thursday, June 9, 2022
10:00 AM continued
continued
10:00 AM - 11:00 AM
Room: CR6, 7th Floor, C Building
Contributions

10:00 AM THE SYNERGY BETWEEN THE APPROACHES TO SAFETY REGULATION OF ADVANCED NUCLEAR REACTORS AND FUSION FACILITIES - Sergey Sinegribov

10:20 AM SAFETY ANALYSIS OF FUSION REACTORS WITH SPECIAL REFERENCE TO EXTERNAL EVENT INITIATORS - Donato Lioce (Iter)

10:40 AM TOWARDS HARMONISATION IN LICENSING OF FUTURE NUCLEAR POWER TECHNOLOGIES IN EUROPE - Egidijus Urbonavicius (Lithuanian energy institute)
11:00 AM Coffee Break
Coffee Break
11:00 AM - 11:30 AM
Room: CR6, 7th Floor, C Building
11:30 AM continued
continued
11:30 AM - 12:30 PM
Room: CR6, 7th Floor, C Building
Contributions

11:30 AM DEVELOPMENT OF A FUSION POWER PLANT SAFETY FRAMEWORK - Robert Jennings (UKAEA)

11:50 AM STATUS OF DESIGN BASIS ACCIDENT ANALYSES AND SAFETY CODES APPLICATION FOR EUROPEAN DEMO - Xue Zhou Jin (Karlsruhe Institute of Technology (KIT))

12:10 PM WORKING TOWARDS A PROPORTIONATE REGULATORY FRAMEWORK FOR FUSION POWER PLANTS - Edward Lewis-Smith
12:30 PM Lunch Break
Lunch Break
12:30 PM - 1:30 PM
Room: CR6, 7th Floor, C Building
1:30 PM
1:30 PM - 2:30 PM
Room: CR6, 7th Floor, C Building
Contributions

1:30 PM Overview: Project management and management systems - Pedro Dieguez Porras (NPES)

1:50 PM F4E QUALITY MANAGEMENT SYSTEM EVOLUTION AND REQUIREMENTS PROPAGATION - Rita Batista

2:10 PM THE IMPLEMENTATION OF THE PROJECT AND QUALITY MANAGEMENT SYSTEMS IN THE EU SUPPLY ACTIVITIES FOR ITER - Konstantina Voukelatou (Italian National Agency for new technologies, energy and sustainable economic development (ENEA) )
2:30 PM
2:30 PM - 2:50 PM
Room: CR6, 7th Floor, C Building
Contributions

2:30 PM Overview: Safeguards Considerations for Advanced Nuclear Reactors - Jae-Sung Lee Traci Newton
2:50 PM
2:50 PM - 3:30 PM
Room: CR6, 7th Floor, C Building
Contributions

2:50 PM Overview: Economic and market considerations - Henri Paillere (IAEA) Shutaro Takeda (Kyoto University)

3:10 PM FUSION ENERGY INDUSTRY: FROM DREAM TO REALITY - Anna Soldatova
3:30 PM Coffee Break
Coffee Break
3:30 PM - 4:00 PM
Room: CR6, 7th Floor, C Building
4:00 PM
4:00 PM - 4:40 PM
Room: CR6, 7th Floor, C Building
Contributions

4:00 PM SMALL MODULAR REACTOR AND NUCLEAR FUSION STARTUP COMPANIES - Aliki van Heek (IAEA)

4:20 PM ACHIEVING A SOCIAL LICENSE FOR FUSION ENERGY - Seth Hoedl
4:40 PM
4:40 PM - 5:00 PM
Room: CR6, 7th Floor, C Building
Contributions

4:40 PM Overview: Human Resources and knowledge management - Pedro Dieguez Porras (NPES)
5:00 PM
5:00 PM - 5:40 PM
Room: CR6, 7th Floor, C Building
Contributions

5:00 PM Overview: Knowledge management strategies and techniques - John W Roberts

5:20 PM EUROfusion HUMAN RESOURCES DEVELOPMENT, TRAINING AND KNOWLEDGE MANAGEMENT: NEXT STEPS TO BRINGING THE FUSION RESEARCH COMMUNITY TO THE NUCLEAR NEWBUILD ERA - Guido Lange (EUROfusion)
6:30 PM IAEA Hospitality Reception - Salon A and B
IAEA Hospitality Reception - Salon A and B
6:30 PM - 8:30 PM
Room: Salon A & B
Friday, June 10, 2022
10:00 AM
10:00 AM - 11:20 AM
Room: CR6, 7th Floor, C Building
Contributions

10:00 AM Overview: Fission-fusion hybrid systems - Minghuang Wang Vladimir Artisyuk (ROSATOM) Yican Wu (Institute of Nuclear Energy Safety Technology (INEST),Chinese Academy of Sciences)

10:20 AM NUCLEAR FUEL PROCESSING USING FAST FUSION NEUTRONS PRODUCED IN A SPHERICAL TOKAMAK. - Martin Nieto-Perez (Pennsylvania State University)

10:40 AM THE CONCEPT OF PLASMA-FOCUS DRIVEN FUSION-FISSION HYBRID REACTORS - Leopoldo Soto (Chilean Nuclear Energy Commission)

11:00 AM Overview and Prospects for Fusion Fission Hybrid System Development in China - Minghuang Wang
11:20 AM Coffee Break
Coffee Break
11:20 AM - 11:30 AM
Room: CR6, 7th Floor, C Building
11:30 AM continued
continued
11:30 AM - 12:50 PM
Room: CR6, 7th Floor, C Building
Contributions

11:30 AM PILOT HYBRID EXPERIMENT WITH REVERSED FIELD PINCH AS NEUTRON SOURCE AND DOUBLE FISSION TEST BEDS: AN INNOVATIVE STAGE APPROACH TOWARDS A FULL POWER FUSION-FISSION HYBRID REACTOR - Roberto Piovan (Consorzio RFX)

11:50 AM Hybrid fusion-fission system based on a compact tokamak device with proven technologies - Renato Gatto (Sapienza University of Rome)

12:10 PM FUSION-FISSION HYBRID REACTOR BASED ON HIGH FIELD TOKAMAK NEUTRON SOURCE - Francesco Orsitto

12:30 PM NEUTRON SPECTRA IN FUSION-FISSION HYBRID REACTOR (FFHR) FOR SPENT FUEL TREATMENT - Juana Gervasoni (CNEA)
12:50 PM
12:50 PM - 1:25 PM
Room: CR6, 7th Floor, C Building
Contributions

12:50 PM IAEA Activity on FURIS (FUsion Reactor Information System) - Lorenz GAERTNER (IAEA)

1:05 PM Closing Remarks - IAEA

Choose timezone