Technical Meeting on Structural Materials for Heavy Liquid Metal Cooled Fast Reactors

Contribution List

23. Opening remarks by IAEA

Stefano Monti (IAEA)

15/10/2019, 10:00

Opening

24. Self-Introduction of the participants

15/10/2019, 10:10

Opening

25. Nomination of the Chairperson

15/10/2019, 10:20

Opening

26. Discussion and Approval of the Agenda

15/10/2019, 10:25

Opening

27. Meeting Objectives and Introduction of IAEA Activities on Fast Reactors Technology

Vladimir Kriventsev (IAEA)

15/10/2019, 10:30

Opening

3. ID-3: Kinetics and mechanism of crack initiation of Liquid Metal Embrittlement of T91 and 15-15Ti Steels

Ms Anna Hojna (CV Rez)

15/10/2019, 10:50

I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

Session I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

6. ID-6: RATEN ICN status on Mechanical Properties Investigation of 316L generation IV candidate material

Mr Alexandru Nitu (RATEN ICN )

15/10/2019, 11:40

I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

Session I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

7. ID-7: Simulations of some Structural Materials Behaviour under Neutron Irradiation

Ms Elena Daniela GUGIU (RATEN ICN )

15/10/2019, 13:20

I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

Session I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

11. ID-11: Vacancy type defects behavior in materials foreseen for liquid metal cooled fast reactors

Vladimir Slugen Slugen (Slovak University of Technology)

15/10/2019, 13:50

I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

Session I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

12. ID-12: RESEARCH OF CORROSION BEHAVIOUR OF STEAM GENERATOR TUBES

Kirill Shutko (NIKIET)

15/10/2019, 14:20

I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

Session I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

30. Topic: Outstanding Research Challenges

15/10/2019, 15:10

Group Discussion

34. The status of the IAEA CRP on Fuel Materials for Fast Reactors (FMFR)

Mikhail Veshchunov (IAEA)

15/10/2019, 16:10

Wrap-Up

29. IAEA Publications: Rules and Guidance

Ms Katja Haslinger (IAEA Publications Officer), Ms Nicola Gulley (IAEA: Section Head (Publishing))

15/10/2019, 16:30

Wrap-Up

33. Wrap up of Day 1

Ms Elena Daniela GUGIU (RATEN ICN )

15/10/2019, 17:00

Wrap-Up

18. ID-18: Tensile testing of sub sized T91 steel specimens in liquid lead

Kamil Tucek (European Commission, Joint Research Centre)

16/10/2019, 09:30

I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

Session I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

1. ID-01: Corrosion behaviours of austenitic steel and ferritic steel in LBE with oxygen controlled conditions

Mr Bo Qin (CIAE)

16/10/2019, 10:30

II: Qualification Programmes of Structural Materials for HLM Fast Reactors

Session II: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

13. ID-13: Corrosion and Mechanical Testing of Alumina Forming Austenites for Liquid Lead Applications

Mr Peter Dömstedt (KTH)

16/10/2019, 11:20

II: Qualification Programmes of Structural Materials for HLM Fast Reactors

Session II: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

14. ID-14: Multifunctional Nano-Ceramic Coatings for Next Generation Nuclear Reactors

Mr Fabio Di Fonzo (CNCT), Mr Matteo Vanazzi (CNCT)

16/10/2019, 11:50

II: Qualification Programmes of Structural Materials for HLM Fast Reactors

Session II: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

(videoconference)

8. ID-8: Evaluation of the high-entropy Cr-Fe-Mn-Ni alloys compatibility with a molten lead coolant

Mr Viktor Voyevodin (KIPT )

16/10/2019, 12:20

II: Qualification Programmes of Structural Materials for HLM Fast Reactors

Session II: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

19. ID-19: Title Design and Material Selection for Leak-Before Break Nature of Double Walled Once Through Steam Generators in Lead-Bismuth Cooled Fast Reactors

Mr Jung Hwan Lee (UNIST)

16/10/2019, 14:00

II: Qualification Programmes of Structural Materials for HLM Fast Reactors

Session II: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

20. ID-20: Compatibility Evaluation on Structural Materials in Oxygen Controlled Lead-Bismuth Eutectic at 500C

Mr Zhizhong Jiang (INEST)

16/10/2019, 14:30

II: Qualification Programmes of Structural Materials for HLM Fast Reactors

Session II: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

21. ID-21: Development of alumina forming materials for corrosion mitigation in heavy liquid metal cooled nuclear reactors

Mr Alfons Weisenburger (KIT)

16/10/2019, 15:00

II: Qualification Programmes of Structural Materials for HLM Fast Reactors

Session II: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

22. ID-22: Corrosion of steel claddings of fast reactors fuel elements in the interaction with uranium-plutonium nitride fuel.

Mr Alexander Ivanov (Kurchatov Institute)

16/10/2019, 15:50

II: Qualification Programmes of Structural Materials for HLM Fast Reactors

Session II: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

31. Topic: New Materials and Coating Techniques

16/10/2019, 16:20

Group Discussion

5. ID-5: Overview of materials research for LFR in China

Mr Zhiguang Wang (Institute of Modern Physics)

17/10/2019, 09:30

III: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

Session III: Qualification Programmes of Structural Materials for HLM Fast Reactors

9. ID-9: The effect of lead bismuth eutectic on structural materials for the accelerator driven system MYRRHA

Mr Erich Stergar (SCK•CEN )

17/10/2019, 09:50

III: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

Session III: Qualification Programmes of Structural Materials for HLM Fast Reactors

10. ID-10: Qualification programme of candidate materials for ALFRED

Ms Serena Bassini (ENEA)

17/10/2019, 10:10

III: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

Session III: Qualification Programmes of Structural Materials for HLM Fast Reactors

16. ID-16: Some new R&D focuse in structure materials licensing for the SVBR-100 reactor facilities

Alexander Dedul (AKME-Engineering)

17/10/2019, 11:00

III: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

Session III: Qualification Programmes of Structural Materials for HLM Fast Reactors

2. ID-2: Statue of HLMC technology and related research in China Institute of Atomic Energy

Bin Long (China Institute of Atomic Energy)

17/10/2019, 11:30

III: Corrosion Mitigation Measures: Coating, New Structural Materials, Environmental Conditioning

Session III: Qualification Programmes of Structural Materials for HLM Fast Reactors

32. Topic: Industrialization

17/10/2019, 13:30

Group Discussion

28. Meeting Report, Closing Remarks, Final document publication etc.

Chirayu Batra (IAEA), Vladimir Kriventsev (IAEA)

17/10/2019, 14:30

Closing Discussion

4. ID-4: Coolant interactions with fuel and structural materials

Ms Teodora Retegan (Chalmers University)

I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

Session I: HLM Compatibility with Structural Materials: Phenomena, Modelling and Operational Experience

Back to the event