|
08:30
|
Registration
(until 09:00)
(Board Room C (C Building, 4th Floor))
|
|
09:00
|
Welcome and Opening
-
Melissa Denecke
(IAEA)
Anthony W. Leonard
(General Atomics)
Matteo Barbarino
(International Atomic Energy Agency)
(until 09:30)
(Board Room C (C Building, 4th Floor))
|
|
09:30
|
Plasma Facing Component Design
(until 10:20)
(Board Room C (C Building, 4th Floor))
|
|
09:30
|
Development and testing results of water-cooled divertor target concepts for EU DEMO reactor
- Dr
Eliseo Visca
(ENEA)
(Board Room C (C Building, 4th Floor))
|
|
10:00
|
New developments in the design of a helium-cooled divertor for the Europen DEMO
- Dr
Bradut-Eugen Ghidersa
(Karlsruhe Institute of Technology)
(Board Room C (C Building, 4th Floor))
|
|
10:20
|
--- Coffee Break ---
|
|
10:40
|
Plasma Facing Component Design
(until 11:20)
(Board Room C (C Building, 4th Floor))
|
|
10:40
|
Additive manufacturing of tungsten by means of laser powder bed fusion for plasma-facing component applications
- Mr
Alexander von Müller
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building, 4th Floor))
|
|
11:00
|
Damages on tungsten plasma facing components after experimental campaigns in WEST
- Mr
Mehdi Firdaouss
(CEA)
(Board Room C (C Building, 4th Floor))
|
|
11:20
|
Discussion Session
(until 12:10)
(Board Room C (C Building, 4th Floor))
|
|
11:20
|
Discussion Session: PFC Components
- Dr
Liang Wang
(Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China)
(Board Room C (C Building, 4th Floor))
|
|
|
08:30
|
Registration
(until 09:00)
(Board Room C (C Building, 4th Floor))
|
|
09:00
|
Implications of Applied 3D Fields
(until 10:10)
(Board Room C (C Building, 4th Floor))
|
|
09:00
|
Three-Dimensional Boundary Physics Aspects for the Development of Next Generation Divertor Concepts with Resonant Magnetic Perturbations
-
Marcin Jakubowski
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building, 4th Floor))
|
|
09:30
|
Recent progress in understanding the outer divertor heat flux dynamics during the ELM-crash-suppression by RMPs on KSTAR
-
Hyungho LEE
(National Fusion Research Institute)
(Board Room C (C Building, 4th Floor))
|
|
09:50
|
First-time analysis of detached divertor conditions in RMP ELM suppressed H-mode plasmas in ITER
-
Heinke Frerichs
(University of Wisconsin - Madison)
(Board Room C (C Building, 4th Floor))
|
|
10:10
|
--- Coffee Break ---
|
|
10:30
|
Discussion Session
(until 11:10)
(Board Room C (C Building, 4th Floor))
|
|
10:30
|
Discussion Session: 3D Fields
-
Oliver Schmitz
(University of Wisconsin - Madison, Department of Engineering Physics)
Marcin Jakubowski
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building, 4th Floor))
|
|
11:10
|
Stellarators Divertors
(until 12:30)
(Board Room C (C Building, 4th Floor))
|
|
11:10
|
The Island Divertor Concept of the Wendelstein 7 Stellarator Line – Concept, Experimental Experience and Up-scaling to Reactor Relevant Size
- Dr
Ralf Koenig
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building, 4th Floor))
|
|
11:30
|
Advantage and disadvantage of the LHD heliotron divertor
-
Masahiro Kobayashi
(National Institute for Fusion Science)
(Board Room C (C Building, 4th Floor))
|
|
11:50
|
Divertor and Exhaust Modelling in the Framework of a Systems Code for a Stellarator Power Plant
-
Felix Warmer
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building, 4th Floor))
|
|
|
08:30
|
Registration
(until 09:00)
(Board Room C (C Building, 4th Floor))
|
|
09:00
|
Core-Boundary Plasma Compatibility
(until 10:20)
(Board Room C (C Building, 4th Floor))
|
|
09:00
|
Core-pedestal constraints on divertor design
-
Matteo Barbarino
(International Atomic Energy Agency)
Anthony W. Leonard
(General Atomics)
(Board Room C (C Building, 4th Floor))
|
|
09:30
|
Role of transport versus fueling upon the pedestal density
-
Saskia Mordijck
(The College of William and Mary)
(Board Room C (C Building, 4th Floor))
|
|
10:00
|
Radiative Power Exhaust Research at DIII-D - From Divertor Science to Core-Edge Integration of High Performance Plasmas
-
Aaro Jaervinen
(Lawrence Livermore National Laboratory)
(Board Room C (C Building, 4th Floor))
|
|
10:20
|
--- Coffee Break ---
|
|
10:40
|
Core-Boundary Plasma Compatibility
(until 11:40)
(Board Room C (C Building, 4th Floor))
|
|
10:40
|
Experimental studies of the nitrogen concentration required for divertor detachment in ASDEX Upgrade
-
Stuart Henderson
(UKAEA)
(Board Room C (C Building, 4th Floor))
|
|
11:00
|
Progress towards understanding ITER’s divertor heat-flux width from gyrokinetic simulation
- Dr
C.S. Chang
(Princeton Plasma Physics Laboratory)
(Board Room C (C Building, 4th Floor))
|
|
11:20
|
On the Divertor Heat Flux Width Scaling
-
Xueqiao Xu
(Lawrence Livermore National Laboratory)
(Board Room C (C Building, 4th Floor))
|
|
11:40
|
Discussion Session
(until 12:30)
(Board Room C (C Building, 4th Floor))
|
|
11:40
|
Discussion Session: Core-Edge
-
Anthony W. Leonard
(General Atomics)
(Board Room C (C Building, 4th Floor))
|
|
|
09:00
|
Divertors in Next Step Devices
(until 10:10)
(Board Room C (C Building, 4th Floor))
|
|
09:00
|
The first ITER tungsten divertor: what do we hope to learn?
-
Richard Pitts
(ITER Organization)
(Board Room C (C Building, 4th Floor))
|
|
09:30
|
Recent progress on divertor physics design of CFETR
-
Rui Ding
(Institute of Plasma Physics, Chinese Academy of Sciences)
(Board Room C (C Building, 4th Floor))
|
|
09:50
|
A strategy to develop power exhaust solutions for tokamaks beyond ITER
-
John Canik
(Oak Ridge National Laboratory)
(Board Room C (C Building, 4th Floor))
|
|
10:10
|
--- Coffee Break ---
|
|
10:30
|
Divertors in Next Step Devices
(until 11:10)
(Board Room C (C Building, 4th Floor))
|
|
10:30
|
Power exhaust studies in the Divertor Tokamak Test facility
-
Nicola Vianello
(Consorzio RFX)
(Board Room C (C Building, 4th Floor))
|
|
10:50
|
The physical design of EAST lower tungsten divertor by SOLPS modeling
- Prof.
Chaofeng Sang
(Dalian University of Technology)
(Board Room C (C Building, 4th Floor))
|
|
11:10
|
Discussion Session
(until 12:00)
(Board Room C (C Building, 4th Floor))
|
|
11:10
|
Discussion Session: Next Steps
-
Nobuyuki Asakura
(National Institutes for Quantum and Radiological Science and Technology (QST))
(Board Room C (C Building, 4th Floor))
|
|
|
12:10
|
Divertor Plasma Control
(until 13:10)
(Board Room C (C Building, 4th Floor))
|
|
12:10
|
Using variations in divertor magnetic topology and geometry to optimize divertor detachment
- Prof.
Bruce Lipschultz
(University of York)
(Board Room C (C Building, 4th Floor))
|
|
12:30
|
The Small Angle Slot Divertor Concept for Steady-State Fusion
- Mr
Houyang Guo
(General Atomics)
(Board Room C (C Building, 4th Floor))
|
|
12:50
|
Latest advances in active control of H-mode detachment and its physics on EAST for ITER/CFETR
-
Liang Wang
(Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP))
(Board Room C (C Building, 4th Floor))
|
|
13:10
|
--- Lunch ---
|
|
14:50
|
Divertor Plasma Control
(until 15:10)
(Board Room C (C Building, 4th Floor))
|
|
14:50
|
X-point radiation and detachment control at ASDEX Upgrade
- Dr
Matthias Bernert
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building, 4th Floor))
|
|
15:10
|
Discussion Session
(until 16:10)
(Board Room C (C Building, 4th Floor))
|
|
15:10
|
Discussion Session: Divertor Control
- Prof.
Bruce Lipschultz
(University of York)
(Board Room C (C Building, 4th Floor))
|
|
16:10
|
--- Coffee Break ---
|
|
16:30
|
Poster Session I
(until 18:30)
(Board Room C (C Building - 4th Floor))
|
|
16:30
|
Advanced divertor detachment in H-mode and baffled TCV plasmas
-
Christian Theiler
(Ecole Polytechnique Fédérale de Lausanne (EPFL))
(Board Room C (C Building - 4th Floor))
|
|
16:45
|
Flat Tungsten High Heat Flux Components Development Based On Different Technologies
- Prof.
Damao Yao
(Institute of Plasma Physics Chinese Academy of Sciences)
(Board Room C (C Building - 4th Floor))
|
|
17:00
|
Modelling of cooling performance in single and multi-channel high heat flux structures for fusion applications
- Mr
Samuel Sharp
(Loughborough University)
(Board Room C (C Building - 4th Floor))
|
|
17:15
|
Simulation study of the radiative quasi-snowflake divertor for CFETR
- Prof.
Minyou Ye
(University of Science and Technology of China)
(Board Room C (C Building - 4th Floor))
|
|
17:30
|
A multi-physics modeling approach to predicting erosion, re-deposition and gas retention in fusion tokamak divertors
-
John Canik
(Oak Ridge National Laboratory)
(Board Room C (C Building - 4th Floor))
|
|
17:45
|
A Study of the Maintainability of the Lower (Divertor) Port & Divertor Cassette
-
Andrew Wilde
(UKAEA)
(Board Room C (C Building - 4th Floor))
|
|
18:00
|
Investigation of detachment in Double-Null configurations in the TCV tokamak
-
Olivier Février
(Ecole Polytechnique Fédérale de Lausanne (EPFL))
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Activity and Decay Heat Estimates for the European DEMO Divertor with Respect to WCLL and HCPB Breeder Blanket Module Integration
- Mr
Andrius Tidikas
(Lithuanian Energy Institute)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
DEMO Divertor - Cassette Design and Integration
- Dr
Giuseppe Mazzone
(ENEA Department of Fusion and Technology for Nuclear Safety and Security, via E. Fermi 45, 00044 Frascati, Italy)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Overview of the gas baffle effects on TCV Lower Single Null edge plasmas: multi-code simulations and comparison with experiments
-
Davide Galassi
(Ecole Polytechnique Fédérale de Lausanne (EPFL))
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Radiation-condensation instability: a driver for up-down or in-out asymmetry of divertor plasma
- Dr
Andrei Kukushkin
(NRC Kurchatov Institute)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Some implications of recent technology advances on divertor physics performance requirements of DT fusion tokamaks
-
Marco Wischmeier
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
The Impact of Nonambipolar Energy Flow on Plasma Facing Materials Erosion and Forecast for ITER.
- Mr
Leonid Khimchenko
(Institution "Project center ITER")
Prof.
Viacheslav Budaev
(RNC "Kurchatov Institute")
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Thermal hydraulic modeling and analysis of ITER tungsten divertor mono block
-
Salah El-Din El-Morshedy
(Egyptian Atomic Energy Authority)
(Board Room C (C Building - 4th Floor))
|
|
|
12:30
|
Discussion Session
(until 13:10)
(Board Room C (C Building, 4th Floor))
|
|
12:30
|
Discussion Session: Stellarators
-
Masahiro Kobayashi
(National Institute for Fusion Science)
(Board Room C (C Building, 4th Floor))
|
|
13:10
|
--- Lunch ---
|
|
14:10
|
Alternative Materials for PFCs
(until 15:30)
(Board Room C (C Building, 4th Floor))
|
|
14:10
|
Fast Flowing Liquid Metal Divertor Design Options: Experimental and Numerical Studies
- Prof.
Kolemen Egemen
(Princeton University)
(Board Room C (C Building, 4th Floor))
|
|
14:40
|
Liquid Metal Conceptual Divertor Designs for the European DEMO
-
Thomas Morgan
(Dutch Institute for Fundamental Energy Research)
(Board Room C (C Building, 4th Floor))
|
|
15:10
|
Analyses and Experiments Towards a Lithium Vapor Box Divertor
- Prof.
Robert Goldston
(Princeton University)
(Board Room C (C Building, 4th Floor))
|
|
15:30
|
Discussion Session
(until 16:10)
(Board Room C (C Building, 4th Floor))
|
|
15:30
|
Discussion Session: Alternative Surfaces
- Prof.
Rudolf Neu
(Max-Planck-Institut für Plasmaphysik)
(Board Room C (C Building, 4th Floor))
|
|
16:10
|
--- Coffee Break ---
|
|
16:30
|
Poster Session II
(until 18:30)
(Board Room C (C Building - 4th Floor))
|
|
16:30
|
Impact of X-point geometry and neutrals recycling on edge plasma turbulence
-
Patrick Tamain
(CEA)
(Board Room C (C Building - 4th Floor))
|
|
16:45
|
KINETIC TRAJECTORY SIMULATION METHOD FOR INTERACTION OF MAGNETIZED PLASMA HAVING TWO SPECIES OF POSITIVE IONS WITH TUNGSTEN SURFACE
-
Raju Khanal
(Tribhuvan University)
(Board Room C (C Building - 4th Floor))
|
|
17:15
|
Integrating advanced plasma-wall interaction in 3D turbulent simulations for WEST
-
Hugo Bufferand
(CEA)
(Board Room C (C Building - 4th Floor))
|
|
17:30
|
Impact of divertor configuration on tokamak performances: focus on WEST experiments supported by SOLEDGE2D modelling
-
GUIDO CIRAOLO
(CEA)
(Board Room C (C Building - 4th Floor))
|
|
17:45
|
Radiative divertor experiments with Ne, N, and Kr seeding in LHD
- Dr
Kiyofumi Mukai
(National Institute for Fusion Science)
(Board Room C (C Building - 4th Floor))
|
|
18:00
|
Behaviour of Tin under Low-Temperature Deuterium Plasma Irradiation
- Prof.
R. Neu
(MPI für Plasmaphysik)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Addressing the effect of E×B on closure diveror detachment onset by SOLPS
- Dr
Hailong Du
(Southwestern Institute of Physics)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Characterization of liquid metals as prospective divertor materials under transient plasma loads
- Dr
Vadym Makhlai
(National Science Center “Kharkov Institute of Physics and Technology”, Institute of Plasma Physics)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Importance of divertor physics modeling in system design of LHD-type helical reactor
- Dr
Masahiro Kobayashi
(National Institute for Fusion Science)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Liquid Metal Modeling for Plasma Facing Components
- Dr
Andrei Khodak
(Princeton Plasma Physics Laboratory)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Results of a model of interchange turbulent transport on the correlation between scrape off layer width and core confinement in tokamaks
- Dr
Nicolas Fedorczak
(CEA)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
The role of molecular reactions on power, particle and momentum balance during detachment
-
Kevin Verhaegh
(CCFE)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Two-phases hybrid model for neutral gas transport in Soledge2D-EIRENE
-
Yannick Marandet
(PIIM, CNRS/Aix-Marseille Univ.)
(Board Room C (C Building - 4th Floor))
|
|
|
12:30
|
DEMO Divertor Designs
(until 13:20)
(Board Room C (C Building, 4th Floor))
|
|
12:30
|
Overview of the physics and diagnostics modelling activities for the EU-DEMO divertor
-
Mattia Siccinio
(EUROfusion Consortium)
(Board Room C (C Building, 4th Floor))
|
|
13:00
|
Insights from Systems Code Analysis on Power Exhaust Requirements for Future Fusion Power Systems
-
Mickey R. Wade
(General Atomics)
(Board Room C (C Building, 4th Floor))
|
|
13:20
|
--- Lunch ---
|
|
14:30
|
DEMO Divertor Designs
(until 15:10)
(Board Room C (C Building, 4th Floor))
|
|
14:30
|
Investigation of divertor operation for Japanese DEMO under low density SOL and large power exhaust of $P_{sep}/R$ ~30 MW/m level
- Dr
Nobuyuki Asakura
(National Institutes for Quantum and Radiological Science and Technology (QST), Naka Fusion Institute )
(Board Room C (C Building, 4th Floor))
|
|
14:50
|
Assessing Alternative Divertors for DEMO – strategy and first results
- Prof.
Fulvio Militello
(Culham Centre for Fusion Energy)
(Board Room C (C Building, 4th Floor))
|
|
15:10
|
Discussion Session
(until 16:10)
(Board Room C (C Building, 4th Floor))
|
|
15:10
|
Discussion Session: DEMO Design
-
Marco Wischmeier
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building, 4th Floor))
|
|
16:10
|
--- Coffee Break ---
|
|
16:30
|
Poster Session III
(until 18:30)
(Board Room C (C Building - 4th Floor))
|
|
16:30
|
Engineering integration constraints for advanced magnetic divertor configurations in DEMO
-
Richard Kembleton
(EUROfusion, CCFE)
(Board Room C (C Building - 4th Floor))
|
|
16:45
|
Progress of divertor design concept for Japanese DEMO
-
Nobuyuki Asakura
(National Institutes for Quantum and Radiological Science and Technology (QST))
(Board Room C (C Building - 4th Floor))
|
|
17:00
|
A possible divertor combined the advantages of supper-X and snowflake for CFETR/DEMO
-
Hailong Du
(Southwestern Institute of Physics)
(Board Room C (C Building - 4th Floor))
|
|
17:15
|
Status of Divertor/SOL modelling in PROCESS
- Dr
Stuart Muldrew
(CCFE, UKAEA)
(Board Room C (C Building - 4th Floor))
|
|
17:30
|
Study of Single Null divertor in DTT with Nitrogen, Neon and Argon seeding
-
Giulio Rubino
(University of Tuscia)
(Board Room C (C Building - 4th Floor))
|
|
17:45
|
Assessment of the pumping efficiency in DEMO conventional and alternative divertor configurations
-
YURI IGITKHANOV
(Karlsruhe Institute of Technology)
(Board Room C (C Building - 4th Floor))
|
|
18:00
|
Edge and divertor modelling of JT-60SA ITER-like scenario with carbon wall
- Mr
Balbinot Luca
(Consorzio RFX)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Advanced Power Exhaust Studies for New Lower Tungsten Divertor of EAST under High Power and Steady State Operations
- Dr
Hang Si
(Institute of Plasma Physics Chinese Academy of Sciences)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Electromagnetic and mechanical analysis of alternative magnetic divertor configurations for DEMO
- Dr
Roberto Ambrosino
(Consorzio CREATE)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
First multi-fluid modelling results of super-X divertor in DEMO with Ar seeding
- Dr
Lingyan Xiang
(CCFE)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Impact of impurity seedings for divertor protection against intolerable heat loads and tungsten sputtering on general on plasma performances using the SYCOMORE system code
-
Sebastien Kahn
(UKAEA)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Optimization of the impurity seeding recipe in terms of power dissipation, core radiation and fuel dilution with Ar and N seeded SOLPS 5.0 simulations for ASDEX Upgrade
-
Ferdinand Hitzler
(Max Planck Institute for Plasma Physics)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Scoping study of dissipative divertor scenarios for SPARC
-
Maxim Umansky
(Lawrence Livermore National Lab)
(Board Room C (C Building - 4th Floor))
|
|
18:15
|
Simulation study of the radiative divertor of different seeded impurity species for CFETR
- Dr
Shifeng Mao
(University of Science and Technology of China)
(Board Room C (C Building - 4th Floor))
|
|
16:30
|
Programme Committee Meeting
(until 17:00)
(Board Room C (C Building, 4th Floor))
|
|
19:00
|
Dinner
(until 21:00)
()
|
|
|
12:00
|
Discussion Session
(until 13:00)
(Board Room C (C Building, 4th Floor))
|
|
12:00
|
Discussion Session: Wrap up
-
Anthony W. Leonard
(General Atomics)
(Board Room C (C Building, 4th Floor))
|
|
13:00
|
Farewell and Closing
-
Matteo Barbarino
(International Atomic Energy Agency)
Anthony W. Leonard
(General Atomics)
(until 13:15)
(Board Room C (C Building, 4th Floor))
|
|
13:15
|
Executive Discussion
(until 14:00)
(Board Room C (C Building, 4th Floor))
|
|
